Advice for ESS planning | DIY Solar Power Forum

Hi friends,

I'm looking to install an ESS (solar and battery) at my house in San Diego. I have experience with RV/marine installations and have built my own 12v systems and prismatic cell lifepo4 batteries, but my understanding of anything related to the grid is especially weak.

Let me know if I'm missing important things and I'll come back and update the post.

Usage
We currently use between 8-25kwh per day, but 30kwh is possible. I'd guess that the highest usage would come on sunny days. We have a gas water heater and stove and all heating and cooling is via mini split heat pump. In the future, we could switch to a heat pump water heater, which would obviously increase our usage.

We also recently bought an EV (Chevy Bolt), which I currently charge at work but which we'll want to start charging at home in the future. I don't mind paying grid prices as long as we're paying the overnight rate. Charging at home would add approximately 25kwh/week, and could be spread out however.

PV Capacity
I'm honestly not sure yet, because the house has a historic designation and the city is not being very helpful in telling us where we'll be allowed to put panels. It's possible that the system will have to be on the smaller side, perhaps as small as 3kw, but the time of day electricity pricing is so dramatic that a battery-only system would still make sense and we might move forward initially without PV (but planning for it in the future.)

Location and logistics
The main panel on the house is 100a. I think that I'd like to locate the battery in a detached garage that has a 40a sub-panel off the main. I'm leaning this way because we may want to use the house battery to charge the EV, which would be the biggest individual load. It's also more convenient to put there because the house is small. I also may end up putting more PV on the garage than on the house, which might also prescribe putting everything in the garage.

Desired features
- Supplement battery + PV power with grid. I'd prefer to avoid using daytime grid power unless either the battery drops to a predetermined SOC or the AC loads exceed the inverter's capacity.
- The ability to quickly and easily adjust whether or not the house battery charges overnight. I'd want to be able to look at the weather for the next day, think about whether I'll want to EV charge midday, and then make a quick adjustment to tell the charger whether to charge the battery overnight. Ideally, I'd like to be able to do this over the internet.

Let me know what you think; what hardware to consider; what I'm failing to think about, etc.

Thanks in advance! ESS I think has to be listed, even listed as a pair with inverter in most cases.

I'll be installing Sunny Boy Smart Energy for a couple people. It will work with BYD high voltage lithium batteries. Those cost about 2x what server rack batteries do. One thing I like about this inverter is it can take 15kW of PV, export 7.7kW to house or grid, charge battery at the same time with up to 10kW. Some of the others like EG4 and SolArk may have similar capability.

The EG4 PowerPro battery is listed and weatherproof. They have a listed ESS consisting of it and an inverter.

I take it you don't have a reservation for net metering with utility yet. So you'll fall under NEM 3.0, which is only tolerable if you have battery. You may want to choose between net metering (backfeed during a couple hours of peak rates to earn credits you can use off-season), or zero-export so you can have a standard rate plan rather than time of use.

For the EV, financially reasonable choices will be either ESS holds the power before charging, or you use export during peak time (about 5:00 to 7:00 PM) to earn credits so it is net or better when you charge overnight.

How many amps is your main panel? That and 120% rule drives PV size.

Some people get weather info that automatically adjusts what is held in battery vs. backfed to grid. I think one guy does that with Schneider, but I'm not familiar with the various offerings and support.

ESS I think has to be listed, even listed as a pair with inverter in most cases.

I'll be installing Sunny Boy Smart Energy for a couple people. It will work with BYD high voltage lithium batteries. Those cost about 2x what server rack batteries do. One thing I like about this inverter is it can take 15kW of PV, export 7.7kW to house or grid, charge battery at the same time with up to 10kW. Some of the others like EG4 and SolArk may have similar capability.

The EG4 PowerPro battery is listed and weatherproof. They have a listed ESS consisting of it and an inverter.

I take it you don't have a reservation for net metering with utility yet. So you'll fall under NEM 3.0, which is only tolerable if you have battery. You may want to choose between net metering (backfeed during a couple hours of peak rates to earn credits you can use off-season), or zero-export so you can have a standard rate plan rather than time of use.

For the EV, financially reasonable choices will be either ESS holds the power before charging, or you use export during peak time (about 5:00 to 7:00 PM) to earn credits so it is net or better when you charge overnight.

How many amps is your main panel? That and 120% rule drives PV size.

Some people get weather info that automatically adjusts what is held in battery vs. backfed to grid. I think one guy does that with Schneider, but I'm not familiar with the various offerings and support.

Thanks! The main panel is only 100a, will update the post.

Definitely NEM 3.0, and the buyback rates are awful. I honestly don't really even care about earning those credits and would be fine with zero export.

Does even the battery have to be listed even if I'm not selling anything back to the grid? I.e., I can't build my own from prismatic cells?

In today's rapidly evolving energy landscape, homeowners increasingly seek efficient and sustainable solutions to manage their power consumption. Wall-mounted residential ESS (Energy Storage System) has emerged as a transformative technology, offering a sleek and space-saving alternative to traditional energy storage methods. This article explores the benefits and features of wall-mounted battery systems, highlighting why they are becoming the preferred choice for contemporary households.

For more information, please visit sinopoly.

The Rise of Home Energy Storage Systems

As the world shifts towards renewable energy sources, home energy storage systems have become crucial in maximizing the potential of solar power and reducing reliance on the grid. Wall-mounted residential ESS solutions enable homeowners to store excess energy generated during peak sunlight hours. This stored energy can be used anytime, whether during evenings, cloudy days, or when grid electricity prices are high, ensuring a consistent power supply and significant cost savings on electricity bills.

Household Integrated Energy Storage Solution

Why Choose a wall-mounted residential ESS for Your Home?

Wall-mounted batteries, specifically designed for residential use, are gaining popularity among homeowners for several compelling reasons:

Space-Saving Design

Unlike bulky traditional batteries, wall-mounted residential ESS features a sleek and compact design. They are designed to be easily installed on any suitable wall, seamlessly integrating into any home's décor. That means homeowners can optimize living areas without sacrificing valuable floor space, making them an aesthetic and practical choice for residential settings.

Enhanced Energy Independence

Wall-mounted home solar energy storage batteries enhance energy independence by storing excess energy generated from solar panels or during off-peak hours. This reduces reliance on the grid, allowing homeowners to use stored energy during peak times or even during power outages, thereby ensuring continuous electricity supply and greater autonomy over energy usage.

Wall-mounted Residential Energy Storage Systems

Cost-Effective

Over time, wall-mounted residential energy storage systems lead to significant savings on electricity bills. As mentioned above, they optimize energy usage patterns, such as storing excess solar energy for use during higher tariff periods (time-of-use rates). This maximizes the self-consumption of renewable energy and minimizes reliance on grid electricity, thus reducing overall energy costs for homeowners.

Environmentally Friendly

Wall-mounted battery systems for homes promote environmental sustainability by facilitating the use of renewable energy sources like solar power. By storing and efficiently utilizing solar energy, these systems help reduce reliance on fossil fuels and conventional electricity generation methods, thereby lowering carbon emissions and contributing to a greener future. Additionally, they encourage overall energy conservation by optimizing energy usage patterns within the home.

New Release: Wall-mounted Residential ESS Solution

At SolarEast, we're proud to introduce our latest innovation in home energy storage systems - the PowerCool-LFP-WLV wall-mounted residential ESS. It combines advanced technology with user-friendly features to deliver an unparalleled battery storage solution for modern homes. This state-of-the-art residential energy storage system boasts several innovative features that set it apart from the competition.

SolarEast Wall-mounted Energy Storage Battery

For more information, please visit residential ess inverter.

High-efficiency LiFePO4 battery: This home battery system utilizes high-capacity lithium iron phosphate (LiFePO4) battery chemistry, known for its exceptional safety, long cycle life, and high energy density, ensuring optimal performance and peace of mind.

Smart energy management: Integrated with intelligent software, this wall-mounted residential ESS allows you to monitor consumption and control energy distribution to optimize energy flow and maximize savings on electricity bills.

Expandable capacity: The modular design allows for easy expansion, with support for up to 6 battery packs in parallel connection for easy scale energy storage capacity as family needs grow.

Long-lasting performance: Engineered to last, our home ESS boasts an impressive 6,000 cycles at 95% depth of discharge (DOD), ensuring reliable battery storage for years to come.

Wide compatibility: This residential energy storage system is designed to work seamlessly with most mainstream inverters, making it an ideal choice for both new installations and retrofits.

Battery Management System (BMS)

Safety First

SolarEast always prioritizes safety in all our products. The PowerCool-LFP-WLV wall-mounted battery incorporates multiple layers of protection:

50. Integrated with durable and fire-resistant casing materials for enhanced safety
50. Advanced Battery Management System (BMS) for real-time monitoring and protection
50. Comprehensive hardware safeguards against overcharging, overheating, and short-circuiting
50. Compliance with international safety standards (CE, IEC, UN38.3, MSDS certified)

Precision and Performance

The wall-mounted residential ESS PowerCool-LFP-WLV goes beyond energy storage, offering intelligent management capabilities. With dynamic State of Charge (SOC) calibration, you can always rely on accurate readings of your battery's status, enabling more efficient energy use and prolonging battery life.

Designed for Modern Living

This stylish residential ESS is more than just a power solution - it's a statement piece for contemporary homes. The furniture-style design complements any interior without compromising on performance, while its compact form factor with a wall mounting option makes installation a breeze, freeing up valuable space in your home.

Quality and Safety Certifications

Conclusion: Take the Next Step Toward Energy Independence

Wall-mounted residential ESS represents the future of household energy storage, offering a perfect blend of functionality, efficiency, and style. Also, homeowners can enjoy the benefits of a reliable, efficient, and aesthetically pleasing battery storage system that meets the demands of modern living.

For more Electric Farm ATV for saleinformation, please contact us. We will provide professional answers.