LiFePO4 battery is one type of lithium battery. The full name is Lithium Ferro (Iron) Phosphate Battery, also called LFP for short. It is now the safest, most eco-friendly, and longest-life lithium-ion battery.
Link to Godson Tech
Below are the main features and benefits:
Safe —— Unlike other lithium-ion batteries, thermal stable made LiFePO4 battery no risk of thermal runaway, which means no risk of flaming or explosion.
LiFePO4 battery will not burn until it reaches 500 °C, there is no risk of flaming in our battery pack with triple protections.
Eco-Friendly —— Iron is a common metal, while nickel and cobalt are limited metals. They are expensive and need careful treatment and recycling.
Super Long Cycle Life —— Chemical stability, the extremely strong crystal structure of iron phosphate makes LiFePO4 battery does not degrade. During charging and discharging, it will not fade under the continuous actions of lithium ions.
Now the cycle life of LiFePO4 battery can reach over times if under common conditions.
For more basic information, you can also check Wikipedia.
Lithium iron phosphate battery
LiFePO4 battery is ideal for energy storage systems (ESS) such as solar and other renewable systems. Because LiFePO4 battery is safe, efficient, and super long life.
In developed economies, LiFePO4 battery became the most popular new generation of energy storage battery.
Different battery packs of 12V, 24V, and 48V are always chosen as replacements for original lead-acid batteries.
MonoBlock LiFePO4 Battery is a good choice for small solar systems, like 12V/24V200Ah, or higher to 48V300Ah.
For example, BattleBorn 12.8V battery is the same size case as the original lead-acid battery, could be directly replaced and upgraded.
For large solar energy storage systems like 50kWh, Modular LiFePO4 battery will be more suited.
Modular LiFePO4 Battery is a kind of server rack battery, scalable to 50kWh in one group, and more groups can be paralleled. It is also more stable due to the advanced BMS.
Another popular choice for home solar battery is the “power wall” type. The big difference is the good looking, so it can be fit into the interior decoration.
Modular 48V LiFePO4 battery is more popular for large energy storage systems (ESS) used in communication base stations.
With the development of lithium-ion battery technology, because of its high energy density, high stability, high-temperature performance, super long cycle life, environmentally friendly, and other advantages, LiFePO4 batteries are more and more widely used.
The harsh environment and humidity have a significant influence on the stability of telecom base stations. Therefore, a well-performing battery is very important for stabilizing the network signal. This is exactly where LiFePO4 batteries come into action. In addition, the presence of 5G technology will drive the demand for LiFePO4 batteries in telecom base stations. As the cost of Li-ion batteries decreases, LiFePO4 batteries are gradually becoming a more economical investment for telecom towers.
Now in China, most telecom stations are upgraded to LiFePO4 batteries. We are also honored to take part in the program.
For UPS systems, traditional lead-acid batteries are low in price. Besides, they have extremely high instant discharge currents. And they are suitable for low-temperature discharge.
In these aspects, LiFePO4 batteries do not perform any better than lead-acid batteries.
The advantage of LiFePO4 batteries is, that they have 8 times the cycle life of lead-acid batteries.
Cycle life is especially important in regions where power may shut off several times a day.
Then the backup power system becomes actually a deep cycle storage system, more cycle life means longer service life.
Generally, lead-acid batteries need to be replaced in 3-4 years, while the replacement period for LiFePO4 batteries is 9-10 years or even 15 years.
Of course, if you are in an area where power outages are rare, only a few times a year, which means the battery bank is floating at 99% of the time, lead-acid battery is a good choice.
In one of the conditions, there are also the demands of high rate LiFePO4 battery downtown. For those UPS systems in those CBDs, even though the cost of the high rate LiFePO4 battery is high, but comparing to the room cost, it is still worth saving more floor space.
Now a lot of the low-speed vehicles, such as Golf Carts, Patrol Carts, and Tourist Carts, are using LiFePO4 batteries instead of Trojan motive batteries.
LiFePO4 battery is lighter, faster, and has better performance in high temperatures.
High Rate LiFePO4 battery is used in EVs, because of its safety. BYD is using their blade cells in the new series of “HAN”, the dynasty cars.
In a security monitoring system, the role of the battery bank is similar to a UPS, as a backup power system in case of power failure.
Since the recommended charge/discharge current is 0.5C for LiFePO4 batteries, it is much higher than 0.2C for lead-acid batteries. LiFePO4 batteries are more appropriate than lead-acid batteries for these applications.
Super longer cycle life of LiFePO4 batteries is also a huge advantage because the battery system is cycled through deep charging and discharging.
What should we take care of when choosing a LiFePO4 battery? What are the important parameters of a LiFePO4 battery? How to choose the right battery?
Below are the important parameters:
For more details, please see below:
The charge process of LiFePO4 batteries is similar to lead-acid batteries. It can also be divided into three stages.
Constant charging current, e.g. 0.5C, the voltage is continuously increasing during the charge, reaching the max voltage. (Such as 14.6V)
Constant voltage, slowly the current decreases to below 0.05C.
This part can also be called float charge, but for LiFePO4 batteries, float charge is not necessary.
If lead-acid batteries do not reach 100% SOC, sulphation will happen on plates. It will result in a capacity loss.
But there is no need for LiFePO4 battery to charge to 100%, there is no sulphation. On the contrary, if a LiFePO4 battery is overcharged, too many lithium ions will accumulate at one end of the electrode, which will lead to electron escape.
The best charge/discharge cycle for LiFePO4 battery is 10% to 90%, but in my opnion, 5% to 95% is good enough.
It is recommended to keep the charging current of LiFePO4 batteries below 0.5C, as overheating due to rapid charging can cause a negative effect on the battery. Although the current limit for your battery is 1C or higher.
Lead-acid batteries are generally recommended to be charged under 0.2C.
The charge voltage of LiFePO4 battery is recommended to be 14.0V to 14.6V at 25℃, meaning 3.50V to 3.65V per cell. The best recommended charge voltage is 14.4V, which is 3.60V per cell. Compared to 3.65V per cell, there is only a little of the capacity reduced, but you will have a lot more cycles.
If the battery voltage exceeds, please stop charging immediately. Even if your BMS has a protection cut-off, it is better not to trigger it.
LiFePO4 battery does not need to be float-charged.
If the charger has a float voltage setting, it is recommended to set the float voltage at 13.6V. Then it will not have a charging effect on the battery.
The charging temperature range for LiFePO4 batteries is 0°C to 55°C.
It is not recommended to charge below 0°C, theoretically, it is allowed a small current of 0.05C to 0.1C. However, charge under 0°C will crystallize the lithium ions, thus reducing the effective capacity. So, if not necessary, do not charge below 0°C.
There is an advanced type of low-temperature LiFePO4 battery, with internal self-heating built-in, that can be charged at around -10°C.
The BMS controls to heat the battery internally to 5-10°C, which made the battery allowed to charge.
There are also specific low-temperature lithium battery can be charged at -20°C, but the cycle life is not good enough though.
Before connecting LiFePO4 batteries in series, it is recommended all batteries be fully charged to achieve a high consistency of each battery. Because the circuit will shut down when one battery hits the high-end voltage, or low-end voltage, meanwhile, there can be energy left in other batteries.
Regularly check the battery voltage to keep the voltage difference within 50mV (0.05V), it will effectively extend the battery lifetime.
If the battery voltage difference is large, you can consider a Battery Balancer.
For more details on charging, please see below:
There are many different types of LiFePO4 battery, not only in the sizes and applications, but also it is different in the battery cells.
There are different shapes of battery cells and different current grades of the LiFePO4 battery cells.
For more details, please see below:
A good BMS is, to do the protection job well, and have the necessary function that you want!
A basic BMS is also called as protection circuit board (PCB), but now the advanced BMS has more functions like below:
Temperature Protection
Smart BMS-Cell Balancing
Communication Module
Bluetooth Module
Electronic Switch
Self-heating module
GPS module
For more information:
LiFePO4 battery production can be mainly divided into 2 parts, one is the production of the battery cells, and the other is the assembling, which means the assembly of the battery cells into the various final battery packs we use.
Now a lot of people are choosing LiFePO4 battery instead of lead-acid battery, because of the super long cycle life and high constant working power.
Yes, LiFePO4 battery is a good drop-in replacement of lead-acid battery in most conditions because the voltage is similar.
If you want to learn more, please visit our website LiFePO4 Rechargeable Prismatic Battery.
The working voltage of lead-acid battery system is always like 12V, 24V, 48V, and higher.
LiFePO4 battery is 3.2V per cell, so there can be many solutions like 12.8V, 25.6V, 48.0V, 51.2V, and upper.
One battery pack with 4 single LiFePO4 cells in series is 12.8V, which is close to 12V, the voltage of the popular 6 cells lead-acid batteries.
The voltages are still in the range of the existed chargers, controllers, inverters. So LiFePO4 battery pack is well suited to replace the original lead-acid batteries without changing anything else. As well as in 24V, 48V systems and higher.
Our MonoBlock LiFePO4 battery is designed to replace the original lead-acid battery directly, not only in the similar voltage but also in the same containers.
Please note, SYNERTAC is a registered trademark of Sunon Battery.
Compared to lead-acid batteries, LiFePO4 battery has more than 8 times the cycle life of deep-cycle lead-acid batteries.
The typical recommended DOD (Depth of Discharge) for LiFePO4 batteries is 80% to 90%. It is much higher than 50%, which is recommended for deep cycle lead batteries. Actually, the usable capacity of LiFePO4 battery is 1.8 times of a deep-cycle lead-acid battery while the same Ampere Hour.
Even one LiFePO4 battery is much more expensive than lead-acid battery, but in the long term, LiFePO4 battery is actually cheaper. The cycle life of LiFePO4 battery can reach - times. If we consider for 5 years, 10 years, or even more, LiFePO4 battery is no doubt the better option.
Due to the chemical stability, and thermal stability of lithium iron phosphate, the safety performance of LiFePO4 batteries is equivalent to lead-acid batteries.
Also, there is the BMS to protect the battery pack from over-voltage, under-voltage, over-current, and more, temperature protection. With triple protection, the LiFePO4 battery is safe.
With the protections of BMS, LiFePO4 battery can be safer even than lead-acid battery, because there will not be over-charge, or over-temperature.
No maintenance is required.
VRLA batteries still require appropriate maintenance and effective control of voltage & current, to achieve the best working condition and cycle life. Meanwhile, LiFePO4 batteries require no maintenance due to the BMS protection.
Even smarter, our modular LiFePO4 battery has been built with a data monitoring chip of voltage, current, temperature. The BMS will detect any abnormal condition on its own, thus avoiding potential problems at the very earliest.
LiFePO4 Batteries are less than half the weight of lead-acid batteries, saving labor & time cost in installation, replacements, and maintenance.
For example, one 12V100Ah deep cycle AGM battery is around 30kg, while 12.8V100Ah LiFePO4 battery is only 12kg.
The charging efficiency of LiFePO4 batteries is over 96-99%, compared to 80%-90% for lead-acid batteries. It means a much lower percentage of energy is lost.
In the case of the solar system, it means more energy is saved. Sometimes, it can be critical whether the power is enough, whether the system can be constantly working.
Besides, LiFePO4 battery can be charged to over 90% full within 2 hours, while lead-acid battery always takes 8hours and more.
For energy storage type, the max constant discharge current of LiFePO4 battery is 0.5C-1C, while the lead-acid battery is only 0.1C-0.3C. Otherwise, the cycle life of lead battery will be greatly reduced.
In this way, high-power appliances or inverters can easily run with LiFePO4 batteries and may be limited if with lead batteries.
But there is also one thing you should take care of. When the current is over the BMS limit, LiFePO4 battery will cut down the circuit, which lead-acid battery will not.
For example, if your solar system inverter is 5kW, with a 48V100Ah system, both LiFePO4 and lead-acid battery systems will not cut down the power supply.
But if with a 6kW inverter, while the total current reaches 117A, which is over 100A(1C). LiFePO4 battery will cut down the circuit if 100A is the current limit. You have to upgrade the battery to higher current or bigger capacity. Or low down the inverter.
It also happens in power appliances, such as low-speed vehicles. For the motors, there is a peak power with a much higher current than rated power, the current limit should be released.
LiFePO4 battery has a much better high-temperature tolerance.
At a room temperature of 50°C, the cycle life of lead-acid batteries is greatly reduced, while LiFePO4 batteries have no significant influence.
LiFePO4 batteries can work as usual at 50°C.
All lithium batteries are not recommended to charge below 0°C.
That’s why we developed an internal self-heating solution. This solution can be charged at room temperature above -10°C, adapted to cold weather.
If below -20°C, special cell materials are required, but the cycle life is still not ideal. The cycle life under -20°C is always around 300~400 cycles.
LiFePO4 has excellent thermal and chemical stability, making it the safest lithium battery technology available. It will not explode even if there is an internal short circuit.
NMC and other lithium batteries are more likely to heat up during the charging process, leading to thermal runaway, which could cause an explosion.
Lithium iron phosphate is technically proven to have the lowest capacity loss rate, so the effective capacity decays more slowly and has a longer cycle life.
In the same condition, LiFePO4 battery has 50% more cycle life than NMC battery.
LiFePO4 batteries are made from non-toxic materials such as iron, graphite, and copper, all of which are easily recycled.
LiFePO4 batteries do not contain nickel, or cobalt, both of which are limited and expensive metals.
In stationary energy storage systems, more people are choosing LiFePO4 batteries due to their safety, longer cycle life, and eco-friendly features.
In terms of price, LiFePO4 has a great advantage over NMC due to the popularity of the materials. Especially for large energy storage systems, LiFePO4 battery is better than NMC cells or other lithium batteries.
The energy ratio of LiFePO4 battery is lower than NMC battery, which means the weight is higher at the same capacity.
In applications where the weight is important, like small mobile electronic devices, such as cell phones, laptops, and tablets, there will be a significant disadvantage.
The discharge limits are not that much compared to charging.
But it is very important to check the discharge current/power limit, to make sure it can support your appliances.
It is also recommended that discharge current is below 0.5C to avoid overheating.
Do not empty the battery, it is recommended to hold at least 5% of the battery capacity.
LiFePO4 batteries are available in a variety of combinations and terminal styles.
It is necessary to read the manufacturer’s instructions carefully.
12V MonoBlock LiFePO4 battery is a replacement of lead-acid battery, the terminal is the same as the lead battery, and the connection is also similar.
It can be installed in any direction, and please note that the actual voltage of 12V LiFePO4 battery is 12.8V.
While 48V modular LiFePO4 batteries are mounted on specific racks, it is recommended to follow the installation instructions.
Requires little maintenance.
If you want, you can check the voltage once per month or several months.
Control of charging voltage and current, the good thing is the BMS is already in control. If you have access to the battery BMS settings, you can change a little bit of the parameters, so the battery can be working better based on your conditions.
Control of discharge voltage and current, under control of BMS.
LiFePO4 prismatic cells is a battery that encapsulates lithium iron phosphate in a Prismatic shell. The electrode tablets (anode, partition, cathode) in the shell form a battery pack through stacking chiefly.
Lithium iron phosphate Prismatic Cells have lots of advantages as a matter of fact. The most obvious advantage is they contain more energy and provide higher durability Since they flat body. For the same volume, stacking bonded batteries can release more energy at one time and provide better performance.
LiFePO4 prismatic cell are mainly used for energy storage systems and electric vehicles basically. They are not suitable for small devices such as electric bicycles and mobile phones. Therefore, they are more suitable for energy -intensive applications.
Above all, Just as below picture, the structure of cells are main made up of Cathode, Anode, And electrolyte and separator.
Lithium-ion uses a anode (negative electrode) , an cathode (positive electrode)and electrolyte as conductor chiefly.
The anode of a discharging battery is negative and the cathode positive correspondingly.
A separator creates a barrier between the cathode and anode, preventing the electrodes from touching while allowing electrical charge to flow freely between them.
The cathode is metal oxide, and the anode consists of porous carbon. During discharge, the ions flow from the anode to the cathode through the electrolyte and separator. Charge reverses the direction and the ions flow from the cathode to the anode.
Below picture illustrates the process.
ELB is a battery manufacturer who main produce the high quality LiFePO4 prismatic cells, so if you want to sourcing LiFePO4 prismatic cells, ELB is a good choice. Here is the main lifespan curve of LiFePO4 prismatic cells for your reference. Or you can click here to get moredetails about the LiFePO4 prismatic cells.
Currently, we ELB mainly developed 5 model of LiFePO4 prismatic cells.
Here is the Comparison between prismatic cells vs cylindrical cells,
If your lithium application requires high power, long service life and good performance, thinking less about the effective use of space, a cylindrical cell could be your selection. Otherwise, if your application needs to be suitable for a limited space and a higher price is acceptable, a prismatic cell could be better.
When you are not sure what type of lithium cell you should use, try to consider an experienced partner, such as ELB, that is able to provide a power supply solution matching your specific requirement and helps you make a reasonable buying decision.
Are you interested in learning more about Lithium Battery for Electric Devices? Contact us today to secure an expert consultation!